Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Yonkers
Getting a new garage door in Yonkers rarely works like the catalogs suggest. The city is dense and hilly, the housing stock runs from pre-war to mid-century, and most garages here sit under the house or open onto a grade that flat-lot installers don’t plan for. We handle the measurements, the fitting, and the hardware that older Yonkers homes actually have, whether that’s an undersized opening off a steep driveway on the west side or a low-headroom garage in Crestwood. Call (844) 443-4494 and we’ll book a free measure and a written price. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Yonkers Homeowners Call Yonkers Garage Door Repair Co for Garage Door Installation
Garage doors are all we do. We’re not a general contractor or a handyman who’ll get to your door between other jobs. That focus matters in a city like Yonkers, where installation problems usually aren’t about picking a door, they’re about fitting one into an old opening that has moved, settled, or was never square to begin with.
Our technicians have up to 13 years of experience, and they work with the brand already in your garage rather than around it. We know Craftsman openers from the 1990s and LiftMaster and Chamberlain units installed a decade later, and we install Clopay and Amarr doors built to the opening you actually have. If your existing opener still has life in it, we’ll tell you. That honesty is why people in Yonkers call us back and pass the number along.
Response to Yonkers is quick. Because the city is compact, we can get a technician out to measure and quote without the scheduling runaround you’d get from a bigger operation covering all of Westchester. Somebody answers the phone, a time gets set, and the estimate is free.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Yonkers
New Door Installation in Yonkers
A typical new door installation in Yonkers runs $700 – $2,200 for the door and labor, and the written estimate sets the final price. Many homes here sit on streets where the garage is tucked under the house at street level or opens onto a steep apron, so we measure the opening and the grade before anything gets ordered. That’s the step that decides whether a standard sectional works or you need something built to fit.

Single Car Door Installation in Yonkers
Single car doors are common in the two- and three-family houses scattered across Yonkers, and they’re often the tightest fit. Older frames are rarely square, so a door that measures right on paper can leave a gap at one corner once it’s hung. We check the framing, the headroom, and the bottom brackets before we commit to a size, then shim and adjust so it seals evenly.

Double Car Door Installation in Yonkers
Double car doors on wider garages give us more room to work but more weight to balance. On sloped driveways, a wide door is more likely to bind because the pitch pulls it off level. We re-set the bottom brackets and adjust spring tension to match the grade so the door travels smoothly and closes flush against the floor.

Custom Garage Door Installation in Yonkers
Custom work is where Yonkers housing stock really shows up. Non-standard opening widths, low ceilings, and out-of-square frames across the west side and Crestwood mean off-the-shelf sizes often won’t fit cleanly. We build to the opening, and where headroom is short we convert to a low-headroom torsion system so the door clears the ceiling without straining the opener.
Steel and Wood Door Options
For most Yonkers homes we steer toward steel: it holds up through Hudson Valley winters, resists rust better than older wood panels, and needs less upkeep. Wood is still the right call where you’re matching a historic facade on a pre-war house, but it needs more attention in humid summers when panels swell and bind. We’ll walk you through both before you decide.
Trusted Brands We Service in Yonkers
We work with the major names homeowners here already own: LiftMaster, Chamberlain, Craftsman, and Raynor openers, plus Clopay, Amarr, and Wayne Dalton doors. That means we can install a door and match it to the opener you have, or recommend a new one if yours is past its useful life. We don’t claim to stock parts locally, but we know these systems well enough to diagnose quickly and get the right components ordered without guesswork. From spring to opener to the full door, one call covers it.
Common Garage Door Installation Problems We See in Yonkers Homes
- Sloped driveway aprons. Yonkers’ hillside streets often put the garage on a grade, so a door that runs fine on flat ground scrapes or binds here. Bottom brackets need re-setting and spring tension adjusted for the pitch, a step flat-lot installers skip.
- Out-of-square openings. Pre-war and mid-century homes across the west side have frames that have settled over decades. Standard-sized doors fit poorly, leaving gaps that let in cold air and weaken security.
- Low-headroom garages. Many garages are built into hillsides with little ceiling clearance, so the existing spring system is often undersized. That strains the opener and shortens spring life; a low-headroom torsion conversion usually fixes it.
- Rust and swollen wood. Winter freeze-thaw and road salt spray pit steel tracks and hinges, while humid summers swell old wood panels until they bind. Both show up in older Yonkers doors that haven’t been serviced in years.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Installation in Yonkers, NY
Installation pricing in Yonkers is set per job by the written estimate, and that estimate is free. Here’s what typical work runs in this market:
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2,200 |
| Opener Installation | $250 – $550 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Panel Replacement | $250 – $500 |
What moves the number: door size and material, whether the opening is square, headroom, and whether you need a torsion conversion or new opener. Whatever the price is, it’s quoted and agreed before any work starts. No invoice surprises once the door is up.
We Also Serve Cities Near Yonkers
We also take garage door installation calls in Bronxville, Hastings-on-Hudson, Eastchester, and Dobbs Ferry. The same hillside grades and older housing stock show up across these towns, so the approach carries over. If you’re near Yonkers and need a new door measured, call and we’ll set a time.
Serving Yonkers, NY – Our Local Coverage Area
We serve Yonkers and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Yonkers
Yes. Sloped aprons are the norm on Yonkers’ hillside streets, and we set bottom brackets and adjust spring tension to match the pitch so the door travels level and seals evenly. A door that looks fine on flat ground can scrape here, so the grade gets measured before we order anything. Call (844) 443-4494 for a free measure and quote.
A low-headroom torsion system paired with a sectional door built to your clearance is usually the right answer. Many garages in Yonkers are built into hillsides with short ceilings, so a standard torsion setup won’t fit and extension springs strain the opener. We measure headroom first, then recommend the door and spring setup that clears it. Call (844) 443-4494 to book a free measure.
If your current door leaves uneven gaps at the corners, rubs on one side, or needs constant adjustment, the opening has likely settled out of square. That’s common in pre-war and mid-century homes across Yonkers. A technician can check it in minutes with a level and tape measure; call (844) 443-4494 and we’ll confirm before any door gets ordered.
We install Clopay, Amarr, and Wayne Dalton doors and LiftMaster, Chamberlain, Craftsman, and Raynor openers. We’re factory-familiar with all of them, so we can match a new door to the opener you already own or recommend a replacement if yours is due. Call (844) 443-4494 and tell us what you have.
A torsion spring typically lasts through thousands of open and close cycles, and most Yonkers homeowners see replacement somewhere in the range of several years depending on daily use. Rust from winter salt spray and strain from low-headroom setups both shorten that. If your door feels heavy or the opener strains, call (844) 443-4494 before the spring snaps. One spring runs $180 – $340; a matched pair is usually replaced together at about twice that.
Get a Free Measure and Written Price in Yonkers
Measuring is free and the price is set in writing before we touch a thing. Call (844) 443-4494 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One call covers the full job: diagnose, order, install, and adjust for the grade your driveway actually has.
Written by the team at Yonkers Garage Door Repair Co.