Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Yonkers Homeowners
A new garage door is one of the few exterior upgrades that changes how a Yonkers house works every single day. Maybe your current door is a wooden original from decades ago that sticks when the temperature drops, or a builder-grade steel door with rust creeping along the bottom panel and a dent that won’t straighten. Maybe the opener strains, the rollers squeal, and you’ve finally decided the door isn’t worth another spring. That’s where we come in.
Garage doors are all we do. Our technicians have up to 13 years of experience measuring, ordering and installing doors from Clopay, Amarr, Wayne Dalton and other leading brands, and they work on the hardware already in your garage, not around it. We quote a free estimate, measure the opening carefully, and put the plan in writing before anything is ordered. If your current door still has a repair left in it, we’ll tell you. Call (844) 443-4494. We answer 24/7, with fast dispatch from 7am to 7pm.
What Our Garage Door Installation Service Includes
New Door Installation
New door installation is the full job: measuring the existing opening, checking the headroom and side clearance, matching the door to your opener, and setting the springs and tracks for the new weight. You need it when a door has reached the end of its service life, when a repair would cost half of a replacement, or when you’re changing the look of the front of the house. We measure first and quote in writing, because a door that’s ordered to the wrong size is a problem nobody needs. Every opening gets checked for plumb before we recommend a door.

Single Car Door
A single car door is the standard 8- or 9-foot-wide door that covers one parking bay, and it’s the most common installation in Yonkers garages. You need a new one when the existing door is warped, when the bottom section has taken water damage, or when the door’s weight has outgrown the opener pushing it. We match spring tension to the new door’s actual weight instead of reusing the old springs, which is where a lot of off-the-shelf jobs go wrong. Single doors also tend to be the easiest to upgrade for insulation without changing the frame.

Double Car Door
A double car door spans a 16-foot opening, which puts more load on the springs, the torsion bar and the tracks than a single door ever does. You need one when you have two bays under one opening, when a wide wooden door is sagging in the middle, or when an older door has been repaired so many times the hardware is mismatched. We check the header and the jamb for straightness on wide openings, because a 16-foot span shows a half-inch of sag very clearly. Then we spec the springs for the correct weight and set the reinforcement where the door needs it.

Custom Garage Door
Custom garage door work covers unusual openings: oversize bays, low-headroom garages, non-standard widths, and doors that have to match the trim and proportions of an older house. You need it when an off-the-shelf size simply won’t fit, or when the door is a visible part of the front elevation and the standard styles look wrong. We take careful measurements, talk through the trade-offs of weight, insulation and window placement, and confirm the opener will handle the result. On older Yonkers houses, this is often the only honest way to get a door that fits properly.
Steel Doors
Steel doors are the most common choice for Yonkers homes: light, strong, reasonably priced and easy to maintain. You need a steel door when you want a durable door that holds up to weather and won’t need painting every few years, or when the old door has rusted through at the bottom panel. We recommend steel doors where the garage faces the street and gets the worst of the weather, and we spec insulation carefully for garages below living space. A properly installed steel door also keeps the opener’s load predictable, which extends its life.
Wood Doors
Wood doors bring a look steel can’t match, and on a lot of older Yonkers houses they’re the right choice for the architecture. You need one when you want a painted or stained door that coordinates with the house, when the original door was wood and the trim was built around it, or when a custom size calls for a material that can be fabricated. Wood is heavier, so the springs and opener have to be matched to the real weight, not guessed. We talk through the maintenance honestly before you commit, because a wood door needs care that a steel one doesn’t.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work on the brand already in your garage. That matters more than it sounds: when a technician already knows how a LiftMaster opener pairs with a particular door weight, or where a Wayne Dalton door tends to wear at the hinges and rollers, the diagnosis is faster and the install is planned around the real hardware. We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, and our technicians have handled each of them on real installs. We’ll also tell you plainly when your existing opener isn’t the right match for the door you’re considering, rather than installing around it and hoping.
On the door side, Clopay and Amarr cover most of the steel and insulated options we recommend in Yonkers, and Wayne Dalton and Raynor come up often on older and custom openings. On the opener side, LiftMaster and Craftsman are the systems we see most; a LiftMaster or Chamberlain opener with modern safety features is usually the sensible pairing for a new door, and legacy Craftsman and Genie systems can often keep working if they support the door’s weight and reversing safety. Whether you have Wayne Dalton, Clopay, LiftMaster, Raynor or any other make, we can help. If you’d like to compare styles first, our Yonkers Garage Door Repair Co home page lays out the full range of what we do.
Signs You Need Garage Door Installation Right Now
Some warnings mean a repair; others mean the door itself has reached the end. These are the ones we see most in Yonkers, roughly in order of urgency.
- The door is visibly sagging or bowed. A dip in the middle of a wide door is usually a sign the panel or its internal reinforcement has failed. Adjusting the springs won’t fix it, and the strain transfers to the opener.
- Panels are cracked, rusted through or separating. Rust along the bottom edge and cracked panels weaken the door’s structure over time. Once the damage reaches the panel joints, patching stops being worth the money.
- The door won’t stay level or has gone out of track repeatedly. If tracks and rollers have been realigned more than once and the door still binds, the door itself is likely the cause. Replacing it stops the cycle.
- The opener can no longer lift the door reliably. If a correctly adjusted opener on the right springs still struggles, the door’s weight or balance has changed. A new door solves the balance problem at the source.
- You’ve had the same repair redone in the same season. Repeated spring, cable or roller work on a door of the same age usually means the whole assembly is tired. A written estimate for a replacement is worth having in hand before the next failure.
Our Garage Door Installation Process – Step by Step
- 1
Free estimate and on-site measurement. We come out, measure the opening precisely, check headroom, side clearance and the condition of the frame, and look at the opener you already have. You get a written estimate for what’s actually needed, not a range.
- 2
Choosing the door and confirming the details. We talk through steel versus wood, single versus double, insulation and window options, and the size and finish. You confirm the price in writing before anything is ordered.
- 3
Preparing the opening. When the new door arrives, we remove the old door carefully, check the framing and jamb for straightness and rot, and correct anything that would stop the new door from hanging true.
- 4
Installation and spring setup. The new tracks, springs, hinges and rollers go in, and we set the spring tension to the door’s actual weight rather than an estimate. Then we test the balance by hand before the opener is connected.
- 5
Safety check and walkthrough. We test the reversing safety feature, check the travel limits, and show you how the door and opener operate together. Our technicians have up to 13 years of experience doing exactly this final check, and it’s the step that catches the small mistakes.
Torsion springs and cables are under extreme tension, and adjusting them by hand is the most dangerous thing anyone can do on a garage door. Our technicians are trained for that work. Please don’t attempt spring or cable adjustment yourself.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Yonkers?
Garage door installation in Yonkers typically runs $700 – $2,200, and that range covers everything from a basic single steel door to a larger or custom door with insulation and windows. The range is wide because the door, not the labor, is the biggest variable. A typical single car steel door installation in Yonkers runs at the lower end of that range, while a 16-foot double or a custom wood door sits at the top. Whatever the final number, the written estimate sets the price, and we confirm the total before the door is ordered.
| Job | Typical estimated range |
|---|---|
| New door installation | $700 – $2,200 |
| Opener installation (if the new door needs one) | $250 – $550 |
| Panel replacement (when only one section is damaged) | $250 – $500 |
| Spring repair (one spring) | $180 – $340 |
What affects the price: door width and height, steel versus wood, insulation and window options, whether the opener needs replacing, and how much frame or jamb work the opening needs. How to avoid overpaying: get a written estimate that lists the door, the labor and any opener changes, and check the old door’s balance before deciding a full replacement is needed. A free estimate includes measuring the opening, a walk-through of the options, and a written price with no obligation.
Garage Door Installation Near Yonkers – Our Service Area
We install garage doors for homeowners in Yonkers and the towns around it, including Eastchester, Hastings-on-Hudson, Dobbs Ferry, Scarsdale, Hartsdale, Montebello, Wesley Hills and Sloatsburg. Travel times vary with traffic and the day, so we confirm the timing when we book your estimate rather than guessing at it. If you’re nearby and comparing installers, our garage door installation page for Montebello covers what a typical job involves there, and the garage door installation page for Wesley Hills answers the same questions for that area.
Serving Yonkers, NY – Our Local Coverage Area
We serve Yonkers and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Yonkers
Garage door installation is the full replacement of a door: removing the old door and hardware, checking and correcting the opening, fitting new tracks, springs, hinges and rollers, and setting the door up to work with your opener. It’s a different job from repair, which fixes a part that has failed. If the panel, structure or balance of the door is the problem, installation is the right answer; if it’s one spring or one roller, repair usually is.
Most single car door installations are finished in a few hours, and a double door or a custom install takes longer, sometimes across two visits if the opening needs work. The door has to be measured and ordered first, so the schedule is set from the estimate date rather than the day you call. Call (844) 443-4494 and we’ll book a free measure and confirm the timing. We answer 24/7. Fast dispatch from 7am to 7pm.
Garage door installation in Yonkers typically costs $700 – $2,200, depending on the door size, material and options. Single steel doors sit at the low end, while a wide double door or a custom wood door sits at the high end. If the new door needs a new opener, add a typical $250 – $550 for the opener installation. The written estimate sets the final price, and there’s no charge for the estimate itself. Call (844) 443-4494 for an exact quote.
Yes. Clopay is one of the door brands we work with most, and LiftMaster is one of the opener systems our technicians know best. We’re also factory-familiar with Amarr, Wayne Dalton, Raynor, Chamberlain, Genie and Craftsman, so most Yonkers garages are covered. If you’re not sure what you have, we’ll identify it on the estimate visit.
No, installation itself isn’t a same-day job because the door has to be measured and ordered to fit your opening. What we can do same day is diagnose a failed door or spring and, where a repair will hold, get you moving again until the new door is scheduled. Same-day service applies to repair and urgent calls; installation is measured and scheduled. Call (844) 443-4494 to start with a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm.
Warranty terms depend on the door and the hardware, and we confirm the exact coverage in writing on your estimate before any work is ordered. We don’t quote warranty numbers over the phone or state them in general marketing copy, because they differ between doors and manufacturers. Ask for the written terms with your estimate and you’ll have everything in one place. Call (844) 443-4494 with questions.
Clear the garage floor and the driveway in front of the door, and remove anything stored close to the tracks or the ceiling where the springs and opener sit. Move cars out of the way for the whole visit, since the old door comes down before the new one goes up. If your opener is being replaced too, make sure the power outlet it uses is accessible. Beyond that, there’s nothing to take apart.
Schedule Your Garage Door Installation Service in Yonkers Today
If your door has gone past repair, we’ll measure your opening, quote a free written estimate, and install a door built to fit the first time. From spring to opener to the full door, it’s one call. Call (844) 443-4494 for a no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Yonkers Garage Door Repair Co.