Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Scarsdale?
Garage door work in Scarsdale typically costs $150 – $600, and most visits land in that range because the majority of calls are repairs, not replacements. A single torsion or extension spring runs $180 – $340, a cable replacement $130 – $250, and a new door installed $700 – $2200. Those are estimated ranges for this market; the written estimate sets the final price.
We’re Yonkers Garage Door Repair Co, and garage doors are all we do. A trained technician diagnoses the door you have and works on the brand already in your garage – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman or Raynor. Our technicians have up to 13 years of experience, and we offer free estimates, so you know the number before anyone touches the door. Call (844) 443-4494. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most garage door repairs in Scarsdale cost $150 – $600.
- Spring repair is $180 – $340 for one spring; a matched pair is usually replaced together, so a pair costs about twice that.
- Full door installation is $700 – $2200, and it’s the one job where the door itself, not the labor, sets the price.
- Estimates are free and the written quote is the price you pay.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs run in Scarsdale this year. Ranges are typical estimates for the work, parts included, on a standard single- or double-car residential door.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
A matched pair of springs is the one line item people misread. The $180 – $340 range is for one spring. Springs wear at the same rate, so a technician will usually recommend replacing both at once, and that job costs roughly double the single-spring range. We tell you which springs are near the end of their life before we quote, so there’s no surprise halfway through.
What pushes a bill toward the top of a range: a broken spring on a heavy double door, a snapped cable that also bent a track, or a panel that has to be ordered to match a discontinued Clopay or Amarr profile. What keeps it near the bottom: a single roller set, a simple track adjustment, or an opener that just needs a gear or a logic board rather than a full replacement. New door installation is priced mostly by the door – a basic steel single door sits near the low end, and a larger insulated double door from a premium line sits near the high end.
What Affects Garage Door Pricing in Scarsdale
Scarsdale is a village of older homes, mostly colonials and Tudors built between the 1920s and the 1960s with a steady run of newer construction and additions mixed in. That housing stock shapes the work more than anything else. Here’s what moves the price up or down on a Scarsdale job.
- Door age and original hardware. A garage door built into a 1930s colonial often has been retrofitted more than once, sometimes to a Wayne Dalton or Craftsman setup from a later decade. Older retrofit hardware can mean a repair becomes a partial upgrade, and the technician prices accordingly.
- Single versus double door. A double door carries more weight, so it needs heavier springs and a stronger opener. Spring, cable and opener work on a double door sits toward the higher end of every range on this page.
- Wood and carriage-style doors. Scarsdale has a lot of carriage-style and wood-faced doors that match the house architecture. Panel and section replacement on these costs more than on a plain steel door because the replacement has to match profile and finish.
- Brand and part availability. Working on the brand already in the garage – whether that’s LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman or Raynor – keeps a job straightforward. When a door is a discontinued model, a matching panel may take longer to source, which affects the estimate.
- Tree cover and storm damage. Scarsdale’s mature trees mean limbs and storm debris are a real cause of dented panels and bent tracks. A dented panel that still seals is cosmetic; one that binds the door is a repair.
- Hills, driveways and access. Many Scarsdale driveways are sloped or short, and a door on a slope fights gravity through the whole cycle. That can wear springs and openers faster and changes how a technician sets the door up.
When It’s Cheaper to Repair Than Replace
Most of the time, repair wins. A door that’s structurally sound – straight panels, true tracks, a solid frame – is almost always cheaper to fix than to replace, and the repair lands well under the $150 – $600 range that covers most visits. Springs, cables, rollers, tracks and openers all wear out before the door itself does. Replacing any one of those costs a fraction of a new door.
Replacement starts to make sense when the door itself is failing. Rusted-through steel at the bottom section, cracked or rotted wood on a carriage-style door, panels that can’t be matched anymore, or a door that’s been hit and no longer sits square are all situations where a technician will lay out both options honestly. From spring to opener to the full door, one call covers repair, diagnosis and replacement, so you don’t need a second company to get a straight answer on which way to go.
We’d rather fix what’s there. If a $130 – $250 cable job gets a sound door moving again, that’s the right answer, and we’ll say so. When the door is genuinely finished, we’ll price the replacement and let you compare it to the repair on paper.
How to Save on Garage Door
There’s no magic discount here, but a few habits reliably keep garage door costs down in Scarsdale:
- Fix small problems early. A worn roller or a slightly out-of-line track is a $110 – $240 problem. Left alone, a bad track puts stress on cables and springs and can turn a track fix into a spring or cable repair on top.
- Replace springs in pairs. If one spring breaks, the other is the same age. Replacing both at once costs about twice the single-spring range, but it saves you a second call and a second labor charge when the matching spring fails.
- Lubricate the moving parts. A few minutes a couple of times a year on hinges, rollers and the opener’s rail keeps everything quiet and slows wear. Never touch the springs or cables themselves – more on that below.
- Get the diagnosis right the first time. A door that binds, reverses, or runs unevenly can be a spring, a cable, a track, an opener or a misaligned sensor. Diagnosed correctly, fixed the first time – an accurate diagnosis stops you paying twice for the same symptom.
- Take the free estimate. Get a written estimate before any work starts. That’s the price you’ll pay, and it lets you compare a repair against a replacement with real numbers. Call (844) 443-4494 for a free estimate.
A Word on Safety: Springs and Cables
Torsion and extension springs and the cables that run alongside them are under extreme tension. They’re the most dangerous part of the door, and adjusting or replacing them by hand is how serious injuries happen. We don’t give step-by-step instructions for spring or cable work for that reason. That part of the job belongs to a trained technician – it’s a named specialty at our shop, not a general handyman task, and it’s one of the reasons a spring repair is priced as its own line item.
If a spring snaps or a cable lets go, keep the door closed and don’t run the opener. Then call a professional. Call (844) 443-4494; we answer 24/7 and can get a technician dispatched, fast dispatch from 7am to 7pm, Sunday through Friday. If a call comes in outside those hours, it’s booked into the next opening.
Why Scarsdale Homeowners Call a Garage Door Specialist
A garage door is a mechanical system – springs, cables, tracks, rollers and an opener all working together. A general handyman or a big-box installer who handles a bit of everything will guess at which part is failing. A specialist diagnoses. That’s the whole difference, and it’s why the ranges on this page hold up: the technician knows the exact hardware and the exact fix.
Our openers span the two dominant smart-home lines, LiftMaster and the Chamberlain/myQ ecosystem, alongside legacy Craftsman and Genie systems, so every opener you’re likely to have in a Scarsdale garage is one we know. When a door won’t move, we will – a stuck door trapping a car is an emergency, not a next-week problem, and we treat it that way. You can read more about how we approach the trade on our Yonkers Garage Door Repair Co page.
FAQs – Garage Door Cost
How much does a garage door repair cost in Scarsdale?
Most garage door repairs in Scarsdale cost $150 – $600. That covers the common fixes: springs, cables, rollers, tracks and opener repair. Call (844) 443-4494 for an exact quote on your door – estimates are free.
How much does spring repair cost in Scarsdale?
Spring repair is $180 – $340 for one spring. A matched pair is usually replaced together because both springs are the same age, so a pair costs about twice that range. Call (844) 443-4494 for a written estimate on your door.
Is it cheaper to repair or replace a garage door in Scarsdale?
Repair is usually cheaper – a fix runs $150 – $600, while a new door installed runs $700 – $2200. Replacement only makes sense when the door itself is failing, such as rusted sections, rotted wood, or panels that can’t be matched. Call (844) 443-4494 and we’ll price both so you can compare on paper.
How much does a new garage door cost installed in Scarsdale?
A new garage door installed in Scarsdale costs $700 – $2200, with the door itself driving most of the price. A basic steel single door sits near the low end; a larger insulated double door from a premium line sits near the high end. Call (844) 443-4494 for a free estimate.
Can you come today?
In most cases, yes – same-day service is available, and we treat a stuck or broken door as the urgent call it is. Call (844) 443-4494. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Related Pages and Guides
- Read our guide to garage door spring repair for what a snapped spring looks and sounds like.
- Compare options in garage door installation before you decide to replace.
- Learn about garage door opener repair and why a reversing door isn’t always the opener’s fault.
- See garage door cable repair for the signs of a fraying cable.
- We also work in White Plains and New Rochelle, just down the road from Scarsdale.
- Nearby, see our Eastchester and Tuckahoe service pages.
- For larger doors, our commercial garage door repair page covers the heavier hardware.
- Understand what’s involved in garage door track repair when a door comes off the rails.
- Check our garage door maintenance guide for keeping a Scarsdale door running through the seasons.
Get Your Free Estimate
Whether it’s a spring that just snapped, an opener that won’t respond, or a door you’re ready to replace, we’ll give you a straight answer and a written price before any work begins. Garage doors are all we do, and we work on the brand already in your garage. Call (844) 443-4494 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Scarsdale market as of 2026. Yonkers Garage Door Repair Co offers free estimates – call (844) 443-4494.
Written by the team at Yonkers Garage Door Repair Co.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Emily Lin"Second time using them. Same guy, same good work."
- Andres Morales"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Aisha Boyd