Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Yonkers Homeowners
A broken spring turns a working garage door into a dead weight you can’t safely move. In Yonkers, where so many homes have a garage that’s the main way in and out, a snapped torsion spring can strand a car inside or leave the door hanging open to the street. Our technicians have up to 13 years of experience with exactly this repair, and they treat torsion and extension spring work as the specialized job it is, not a side task. We answer the phone 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday, so a spring failure gets same-day attention when it can. Call (844) 443-4494 for a free estimate, and the price is quoted and agreed before any work starts. Garage doors are all we do, and a spring that’s diagnosed correctly gets fixed the first time.
What Our Garage Door Spring Repair Service Includes
Spring work is the most hazardous repair in this trade, so we handle it as a named specialty rather than an afterthought. Here’s what each piece of the job covers, and what a trained technician actually does on your door.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on a metal shaft above the door, and it does the lifting work so you don’t have to. When it breaks, the door suddenly weighs what feels like a few hundred pounds and often won’t open more than a foot. We replace the spring on its shaft, check that the cable drums and shaft bearings still line up, and set the door to balance the way it should. A torsion spring under tension can injure someone badly if it’s handled without the right tools and training, so this isn’t a job to attempt with what’s in a home toolbox.
Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of the door and stretch to counterbalance it as it closes. Older Yonkers garages, especially those with Wayne Dalton or Craftsman hardware, frequently still use extension springs, and when one lets go it can swing loose with real force. We replace both sides together so the door lifts evenly, and we fit the containment cables that keep a broken spring from whipping into the garage. If your door has extension springs and no cables, that alone is worth a look.
Broken Spring Repair
A broken spring is the call we get most: a loud bang from the garage, a door that won’t lift, or a gap you can see in the coil. The repair means replacing the failed spring, not just patching it, and checking that nothing else took damage when it went. We’ll tell you plainly whether you’re looking at one spring or a matched pair, since a pair is usually the right move and costs about twice the single-spring range. You get a written price before we touch anything.
Spring Adjustment
Adjustment is for the door that still opens but feels wrong: heavy on the way up, slamming down, or stopping halfway. A spring can lose tension over time without breaking, which throws off the balance and wears out the opener. We measure the door’s balance and set the spring tension to match, then confirm the door holds position when you let go at mid-height. Getting this right protects the opener as much as the door.
Safety Cable Installation
Safety cables are the steel cables threaded through extension springs so that a broken spring stays contained instead of flying loose. Older doors sometimes never had them fitted, and they’re a small addition with a big safety payoff. We install cables sized for your spring and door weight, then check that they run clean along the track. If your extension springs are bare, this is a straightforward fix to schedule alongside a repair.
Spring Inspection
An inspection is a close look at the springs, cables, drums, and hardware for the wear that leads to a failure before it happens. We check for gaps in the coil, rust and corrosion, stretched cables, and uneven tension between the two sides. It’s the right call when the door still works but sounds different, or when you’ve just moved into a Yonkers home and don’t know the door’s history. From spring to opener to the full door, we can look at the whole system while we’re there.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work on the brand already in your garage. That matters most with Wayne Dalton doors, where the spring setup and hardware vary quite a bit by model, and knowing the actual hardware saves guesswork. We also service Craftsman equipment, which turns up on a lot of older Yonkers doors and pairs with a range of spring and opener configurations. On Raynor systems we know where the springs and cables tend to wear, so the diagnosis starts from familiarity rather than a clean slate.
Brand knowledge isn’t a sales line for us, it’s how a repair gets done right the first time. When a technician recognizes the door and its springs, they can bring the right hardware and set the tension to spec instead of improvising. Whether you have Wayne Dalton or any other make, we can help, and if your opener needs attention too we handle LiftMaster and Chamberlain systems as well. One call covers the diagnosis, the spring repair, and anything else the door needs.
Signs You Need Garage Door Spring Repair Right Now
Springs usually fail suddenly, but they often warn you first. Here’s what to watch for on a Yonkers door.
- A loud bang from the garage. That crack is often the sound of a torsion spring snapping, and the door will feel far heavier immediately after. Stop using the door and let a technician look before you try the opener again.
- The door won’t lift, or opens only a little. A dead spring means the opener is trying to lift the full weight of the door, which can burn it out fast. If the door won’t move more than a foot, that’s a broken spring more often than a bad opener.
- A visible gap in the spring coil. Look at the torsion spring above the door or the springs along the tracks; a clean break in the coil is a clear sign. Don’t reach up to test it, since the spring is still under tension.
- The door feels heavy or slams shut. A door that drops fast or is hard to lift by hand is out of balance, usually from a spring that’s lost tension. This wears the opener and the door hardware, so it’s worth fixing before something else gives.
- Uneven lifting or a crooked door. If one side rises before the other, one spring is likely doing less work than it should. Left alone, that puts stress on the tracks, rollers, and cables.
Our Garage Door Spring Repair Process – Step by Step
Every spring repair follows the same careful order, from the first look to the final balance check.
- 1
Diagnosis on arrival. We look at the door, the springs, the cables, and the opener together, because a spring problem can hide a secondary issue. We test the door’s balance and travel to see exactly where it’s failing.
- 2
A written estimate before work. You get a clear price for the repair, quoted and agreed before we start, with any extra work spelled out. There’s no surprise on the invoice, because the estimate sets the final price.
- 3
Safe removal of the old spring. We release the tension with the proper winding tools and secure the door so it can’t move while we work. This is the dangerous part of the job, and it’s why spring work goes to a trained technician.
- 4
Fitting the new spring and checking the system. We install the replacement, set the tension, and inspect the cables, drums, and bearings while we have the door open. Anything worn gets flagged so it’s handled now rather than next month.
- 5
Final balance and test cycle. We run the door through full open-and-close cycles and confirm it balances at mid-height and reverses properly. You see it working before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Yonkers?
Garage door spring repair in Yonkers typically runs $180 – $340 for one spring, and that’s the range we quote most often. Since springs are usually replaced as a matched pair, a full pair typically costs about twice that range. A cable that fails along with the spring runs $130 – $250, and if the opener took a beating from lifting a dead door, opener repair sits at $120 – $320.
| Repair | Typical estimated range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
Several things move the number: whether it’s one spring or a pair, the door’s weight and height, the spring type (torsion tends to cost more than extension), and whether related parts like cables or drums need attention at the same time. To avoid overpaying, ask for the price in writing before work starts, and ask whether you’re getting one spring or a pair. Our free estimate spells out what’s included, so there’s no guessing and no add-ons after the fact. The written estimate sets the final price.
Garage Door Spring Repair Near Yonkers – Our Service Area
We handle spring repair in Yonkers and the towns around it, including Eastchester, Hastings-on-Hudson, Dobbs Ferry, Scarsdale, and Hartsdale to the east, and Montebello, Wesley Hills, Suffern, and Sloatsburg to the north. Whether you’re up near Crugers or down by Greenville, we connect you with a local professional who does this work, with fast dispatch from 7am to 7pm. For spring work in nearby Montebello, we also handle garage door spring repair, and the same goes for Wesley Hills with garage door spring repair. If you’re not sure whether your address is covered, call and we’ll tell you straight.
Serving Yonkers, NY – Our Local Coverage Area
We serve Yonkers and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Yonkers
Garage door spring repair means replacing or adjusting the spring that counterbalances your door so it lifts easily. The spring does most of the work the opener would otherwise have to do, and when it breaks or loses tension, the door becomes too heavy to move safely. We replace the failed spring (usually a matched pair), check the cables and hardware, and rebalance the door.
Most spring repairs take about one to two hours once the technician is on site. A single torsion spring replacement is on the quicker end, while a pair plus new safety cables or a cable repair takes longer. We confirm the scope and the time at the estimate, so you know what to expect before work begins.
Spring repair in Yonkers typically runs $180 – $340 for one spring, and a matched pair is usually about twice that. Cable repair runs $130 – $250 and opener repair $120 – $320 if either needs attention at the same time. Call (844) 443-4494 for an exact quote; estimates are free, and the written estimate sets the final price.
Yes. We work on the brand already in your garage, including Wayne Dalton, Craftsman, Raynor, and LiftMaster systems. Knowing the actual hardware helps us diagnose the spring setup quickly and fit the right replacement. Whether you have one of those makes or another, we can help.
Same-day service is available for spring failures when scheduling allows. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday. A call outside dispatch hours is booked into the next opening.
We’ll be clear about what’s covered on your specific repair when we give you the estimate in writing. Ask about coverage for the parts and the labor on your job so there are no questions later. What’s covered goes in the paperwork before work starts.
Clear the floor in front of the door, move cars out of the way, and unlock the door so it can be tested. Don’t try to lift or force the door yourself once you suspect a broken spring; leave it closed or as it sits. Tell us the door’s brand and anything you noticed before it stopped working, and we’ll bring it from there.
Schedule Your Garage Door Spring Repair Service in Yonkers Today
A broken spring won’t fix itself, and forcing the door can damage the opener and the hardware. Call (844) 443-4494 for a free, no-obligation estimate on garage door spring repair, and we’ll diagnose the door and quote the job before any work starts. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Garage doors are all we do, and when your door won’t move, we will.
Written by the team at Yonkers Garage Door Repair Co.