Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Yonkers?
Spring replacement in Yonkers typically costs $180-$340 for one spring, and a matched pair is usually replaced together at about twice that range. That price covers the spring itself, the labor, and balancing the door to run correctly on the new tension. The written estimate we give you sets the final number, and it’s free.
Most spring failures are true emergencies: a snapped torsion spring leaves a door locked down and a car stranded inside. When your door won’t move, we will. We answer 24/7, and crews are dispatched Sunday through Friday, 7am to 7pm. Same-day spring work is common because a broken spring is the one garage door problem that genuinely can’t wait.
Garage doors are all we do. That focus matters here because spring work is the most dangerous repair in the trade. Torsion and extension springs hold enormous stored tension, and the technicians who service them need the right tools and the training to release that energy safely. Our technicians have up to 13 years of experience with exactly this kind of hardware.
Key Takeaways
- One spring: $180-$340 typical. A matched pair: about twice that, since pairs are replaced together.
- Cable damage often shows up alongside a broken spring; cable repair runs $130-$250.
- Most spring jobs are same-day, and the price doesn’t change for urgent work: the written estimate sets it.
- We work on the brand already in your garage, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Free estimates. Call (844) 443-4494 for yours.
Spring Replacement Cost Breakdown (2026)
Here’s how spring replacement and the work that usually travels with it break down in Yonkers this year. These are typical estimated ranges, not a quote. What you actually pay is set by the written estimate after a technician looks at your door.
| Service | Typical Estimated Range |
|---|---|
| Spring repair or replacement (one spring) | $180-$340 |
| Spring replacement, matched pair | About twice the single-spring range |
| Cable repair or replacement | $130-$250 |
| Roller replacement | $110-$220 |
| Track realignment | $120-$240 |
| Panel replacement | $250-$500 |
| Opener repair | $120-$320 |
| Opener installation | $250-$550 |
| General garage door repair | $150-$600 |
| New door installation | $700-$2200 |
Why the swing within a range? The biggest driver is door weight. A single-car door with a lighter spring costs less to re-spring than a wide, insulated double door carrying heavier coils and thicker gauge wire. Spring type matters too: torsion springs mounted on a bar above the door are the common setup on most Yonkers homes, while older doors sometimes use extension springs along the tracks. The two aren’t interchangeable and don’t price the same.
What usually pushes a job higher is damage found during the repair. A broken spring can whip a cable or bend a track, and fixing the spring alone without addressing the cable leaves the door unsafe. We diagnose the whole assembly, tell you what actually needs replacing, and write it into the estimate before any work starts. That’s how it stays fixed the first time.
What Affects Spring Replacement Pricing in Yonkers
Yonkers is an old city, and the housing stock shows it. A lot of the doors we see sit on homes built when Westchester was filling in along the Bronx line, and plenty have been re-sprung more than once. Older doors carry specific quirks a generalist handyman tends to miss, and those quirks have price consequences. Here’s what actually moves the number:
- Door size and weight. A two-car insulated door in the hillside neighborhoods above the Saw Mill River Parkway takes heavier springs than a single door closer to the waterfront. That’s more material and more labor, so it lands higher in the range.
- Torsion vs. extension springs. Torsion springs are the standard on most modern doors and take more skill and tooling to swap safely. Extension springs on older doors are a different job with a different risk profile. Both are within the $180-$340 per-spring range, but which one you have affects where you fall.
- Cycle life of the spring. Springs are rated by how many open-close cycles they’ll take. A standard-duty spring costs less than a high-cycle version meant for a door that runs several times a day. If your household opens that door constantly, the heavier-rated spring is often the better buy despite the higher price.
- Matched pairs. If one spring of a pair snapped and the other is the same age, we usually recommend replacing both. Mixing a new spring with a worn one throws the door out of balance and wears the new one faster. A pair is roughly double the single-spring range.
- Collateral damage. A snapped spring can take a cable with it, or bend a track when the door drops. Those add-ons are common and priced separately (see the table above). The sooner a broken spring gets fixed, the less likely it is to damage anything else.
- Brand fit and opener compatibility. On doors running LiftMaster or Chamberlain openers, the opener can affect how the door is balanced and calibrated once the new springs go on. We’re factory-familiar with the big names and work with the actual hardware, so recalibration is part of getting the job right, not an afterthought.
For a fuller picture of the spring service itself, our spring replacement page covers the parts and the process.
How to Save on Spring Replacement
Spring replacement isn’t really a place to chase the lowest number, because a badly fitted spring is a return trip waiting to happen. But there are honest ways to keep the bill down.
- Get a written estimate before any work. The estimate is free, and it should itemize the spring, labor, and any collateral repairs. Call (844) 443-4494 to set one up. You shouldn’t be paying for a quote after the door is already apart.
- Fix it early. A spring on its way out usually gives warnings: a door that feels heavy on the way up, a gap in the coil, or a bang from the garage. Catching it before it fails means a clean spring swap instead of a spring plus a cable plus a track realignment.
- Replace the pair, not just the broken one. It feels like spending more, but a single new spring next to a worn one wears out faster and can leave you paying twice in a short window. Two springs at once is usually the cheaper path over a few years.
- Stay on top of lubrication and balance checks. A door that’s properly lubricated and balanced puts less strain on its springs. It doesn’t make them last forever, but it helps.
- Ask about the right spring rating. If your door gets heavy daily use, a higher-cycle spring costs a bit more up front but lasts longer than the standard one. Worth asking which fits your household.
We keep the price transparent: the estimate sets it, and there’s no service-call charge tagged onto the number. If you’re weighing a repair against a bigger job, our guide to garage door repair explains when a whole door makes more sense than repeated fixes.
Can You Repair a Broken Spring the Same Day?
Yes. Same-day spring replacement is standard for us because a broken spring leaves the door unusable, and that’s an emergency for most households. We answer 24/7 and dispatch crews fast, Sunday through Friday, 7am to 7pm. A call outside dispatch hours is booked into the next opening. The price doesn’t change because the job is urgent; the written estimate sets it either way.
One word of caution before you touch anything: garage door springs store a dangerous amount of energy. A trained technician releases and re-tensions that energy with the right tools. Homeowners who try to swap a torsion spring by hand get hurt, and it happens more than people expect. This is a repair to hand to a professional. Call (844) 443-4494 and we’ll send a technician who knows the hardware.
Is It Cheaper to Repair a Spring or Replace the Whole Door?
Repairing a spring is almost always cheaper. A spring replacement runs $180-$340 for one spring, while a new door installation is $700-$2200. You only consider a full door when the door itself is failing, not the spring: cracked panels, a bent frame, or a door that’s simply past its life. If the structure is sound and only the spring has failed, replacing the spring is the sensible spend.
We’ll tell you honestly which one your door needs. If a spring is the only problem, that’s what we quote. If we find something that changes the picture, it goes in the estimate before you commit. Our garage door installation page covers what a full replacement involves if you get to that point.
FAQs – Spring Replacement Cost
How much does garage door spring replacement cost in Yonkers?
Spring replacement in Yonkers typically costs $180-$340 for one spring, with a matched pair about double that. The written estimate sets the final price, and it’s free. Call (844) 443-4494 for an exact quote.
Why does a pair of springs cost more than one?
A pair costs about twice the single-spring range because two springs are replaced instead of one. Springs are usually installed in matched pairs, and replacing both at once keeps the door balanced and prevents the older spring from failing soon after. Call (844) 443-4494 to confirm what your door needs.
Is a broken garage door spring an emergency?
Yes, in the sense that the door won’t open, so it’s an emergency for your household. A broken spring leaves the door locked down, traps the car inside, and often can’t be opened manually without risk. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (844) 443-4494.
How long does a spring replacement take?
Most single-spring or pair replacements are done in a single visit, often the same day you call. The job itself is a focused piece of work: the technician drains the old spring’s tension safely, fits the new one, and rebalances the door. If collateral damage turns up, that adds time. Call (844) 443-4494 to book.
Does emergency spring work cost more?
No. The price is set per job by the written estimate, not by when the work happens. A broken spring doesn’t get a surcharge for being urgent. Call (844) 443-4494 for a free estimate.
Why Choose a Garage Door Specialist for Spring Work
Spring replacement is where a generalist outfit gets exposed. Torsion spring work is the most hazardous repair in the garage door trade, and it needs a technician who reads the door’s balance, matches the spring to the door’s weight, and knows the opener calibration that follows. We do nothing but garage doors: spring repair, opener repair, panel work, and full door installation. From spring to opener to the full door, one call covers it, so you never need a second company for the follow-up.
We’re certified to service eight industry-leading brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That range matters because your door and its opener are almost certainly one of them, and we work with the actual hardware rather than guessing at a lookalike replacement. Our opener expertise spans the LiftMaster and Chamberlain systems and their smart-home integrations alongside legacy Craftsman and Genie units, so the calibration after a spring swap is handled properly.
We’re a Yonkers garage door specialist, not a multi-trade home-services company. That focus is the reason a spring job gets diagnosed correctly and fixed the first time. Our technicians have up to 13 years of experience, and spring work sits at the center of what they do. If you’re searching for Yonkers Garage Door Repair Co, you’ve found the team that does this and only this.
We serve homeowners across Yonkers and the surrounding Westchester neighborhoods, from garage door repair in the city to spring and opener service on the edges of the county. If you’re nearby and need the same work, our crews cover Mount Vernon garage door repair, New Rochelle garage door repair, White Plains garage door repair, and Tuckahoe garage door repair. For Eastchester homeowners, Eastchester garage door repair runs the same playbook. A broken spring doesn’t respect town lines, and neither do we.
Need an opener checked while we’re there? Our garage door opener repair service handles the smart-home and legacy systems alike. Tracking a door that’s drifting off its line? We take care of track repair and realignment. And for doors that are simply worn out, garage door replacement covers the full swap. If you’re not sure what’s wrong yet, the front door of the conversation is always a free estimate.
Get a Free Spring Replacement Estimate in Yonkers
A snapped spring is a fixed problem, not a mystery. We quote it, we explain it, and the written estimate is the price you pay – no service-call charge, no surprise add-ons, and the same number whether the job is routine or urgent. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. When your door won’t move, we will. Call (844) 443-4494 for a free estimate today.
Pricing reflects the Yonkers market as of 2026. Yonkers Garage Door Repair Co offers free estimates – call (844) 443-4494.
Written by the team at Yonkers Garage Door Repair Co.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Emily Lin"Second time using them. Same guy, same good work."
- Andres Morales"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Aisha Boyd